logo-samandehi
 

Polymer standards

فرم درخواست استاندارد

لیست استاندارد های پلیمر

 شماره استاندارد

توضیحات

لینک دانلود

ASTM D86−15

Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure

ASTM D86-78 Standard method for distillation of petroleum products

 

ASTM D149−09 (Reapproved 2013) Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies

 

ASTM D 149–97a Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies

 

ASTM D 150–98 Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric
Constant) of Solid Electrical Insulation

ASTM D 256–04 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics

 

ASTM  D257−14 Standard Test Methods for DC Resistance or Conductance of Insulating Material

ASTM D501−03 (Reapproved 2009) Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents1

 

ASTM D570−98 (Reapproved 2010) Standard Test Method for Water Absorption of Plastics1

 

ASTM D635−14 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position

 

ASTM D638−14 Standard Test Method for Tensile Properties of Plastics

ASTM D 648–01 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position


ASTM D664−11a Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration


ASTM D698−12 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using
Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))


ASTM D 785–03 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials1

ASTM D 790–03 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

ASTM D790−10 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

ASTM D 792–00 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement

ASTM D841−13 Standard Specification for Nitration Grade Toluene1

 

ASTM D 882–02 Standard Test Method for Tensile Properties of Thin Plastic Sheeting


ASTM D 955–00 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics

 

ASTM D974−12 Standard Test Method for Acid and Base Number by Color-Indicator Titration

 

ASTM D974−14 Standard Test Method for Acid and Base Number by Color-Indicator Titration

ASTM  D1002–05 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to- Metal)

 

 ASTM D1003–00
 Standard Test Method forHaze and Luminous Transmittance of Transparent Plastics

 

 ASTM D1004–03 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting

 ASTM D1045−14
Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics

 

 ASTM D1082−00 (Reapproved 2011) Standard Test Method for Dissipation Factor and Permittivity (Dielectric Constant) of Mica

 ASTM D1141−98 (Reapproved 2013) Standard Practice for the Preparation of Substitute Ocean Water

 ASTM D 1186–01 Standard Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base1 

 

 ASTM D 1238–04
 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer

 

ASTM D1353−13
 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products1

 

ASTM D1505–03
Standard Test Method for Density of Plastics by the Density-Gradient Technique1 

 

ASTM  D1525–00 Standard Test Method for Vicat Softening Temperature of Plastics1 

 

ASTM  D1531–06 Standard Test Methods for Relative Permittivity (Dielectric Constant) and Dissipation Factor by Fluid Displacement Procedures1 

 

 ASTM D1557–02
Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))

 

ASTM D1557−12  Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))1

 

 ASTM D1585−96 (Reapproved 2011)  Standard Test Methods for Fatty Acids Content of Naval Stores, Including Rosin, Tall Oil, and Related Products

 

 ASTM D1598−15a
 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure

 

 ASTM D1693−15
 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics

 

 ASTM D1693–01
 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics

 

 ASTM D1709–03
Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method

 

 ASTM D1826−94 (Reapproved 2010)
 Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter

 

 ASTM D1835−13
 Standard Specification for Liquefied Petroleum (LP) Gases

 ASTM D1894–01
 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting

 

 ASTM D1922–03a
Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method

 

ASTM D1988−06 (Reapproved 2015)
 Standard Test Method for Mercaptans in Natural Gas Using Length-of-Stain Detector Tubes

 ASTM D2000–12
Standard Classification System for Rubber Products in Automotive Applications

 

ASTM D2047−11  Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine

 

ASTM D2109–01
Standard Test Methods for Nonvolatile Matter in Halogenated Organic Solvents and Their Admixtures

 

 ASTM D2111–02
Standard Test Methods for Specific Gravity and Density of Halogenated Organic Solvents and Their Admixtures

 

 ASTM D2187−94 (Reapproved 2009)  Standard Test Methods for Physical and Chemical Properties of Particulate Ion-Exchange Resins

 

ASTM D2201−99 (Reapproved 2011)
 Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products

 

 ASTM D2240 –03
 Standard Test Method for Rubber Property—Durometer Hardness

 

ASTM D2434–68 (Reapproved 2006)   Standard Test Method for Permeability of Granular Soils (Constant Head)

 

 ASTM D2447–03
 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter

 

 ASTM D 2457–03
 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics

 

 ASTM D2513−14
Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings

 

 ASTM D2572−97 (Reapproved 2010)  Standard Test Method for Isocyanate Groups in Urethane Materials or Prepolymers

 

ASTM D2584−11   Standard Test Method for Ignition Loss of Cured Reinforced Resins

 

ASTM D2622−10
 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry

 

 ASTM D2638−10 (Reapproved 2015)
 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer

 

 ASTM D2737–03
Standard Specification for Polyethylene (PE) Plastic Tubing

 

 ASTM D2839–02
 Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene

 

 ASTM D2990−09
 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics

 

 ASTM D 3012–04
Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven

 

 ASTM D3035–08
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter

 

ASTM D3035−15
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter

 

ASTM D3039/D3039M−14 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials

 ASTM D3080/D3080M−11
Direct Shear Test of Soils Under Consolidated Drained
Conditions

 

 ASTM D3112−13
Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals

 

 ASTM D3174−12

Standard Test Method for
Ash in the Analysis Sample of Coal and Coke from Coal

ASTM D3261−12 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing

 

 ASTM D3276–07 Standard Guide for Painting Inspectors (Metal Substrates) 

 

 ASTM D3339−12
Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration

ASTM D3350−10
Standard Specification for
Polyethylene Plastics Pipe and Fittings Materials1 

ASTM D3350−14 Standard Specification for
Polyethylene Plastics Pipe and Fittings Materials1 

 

 ASTM D3354–96  Standard Test Method for
Blocking Load of Plastic Film by the Parallel Plate Method

 ASTM D3359–97 Standard Test Methods for Measuring Adhesion by Tape Test

 ASTM D3401–97 (Reapproved 2001)
Standard Test Methods for Water in Halogenated Organic Solvents and Their Admixtures

ASTM D3417–99 Standard Test Method for Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC) 

ASTM D3479/D3479M−12 Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials

 

ASTM D3551−08
Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer

 

ASTM D3567−97 (Reapproved 2011) Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber- Reinforced Thermosetting Resin) Pipe and Fittings

 

ASTM D3839−14 Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe

 

 ASTM D4014−03 (Reapproved 2012)
Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges

 

 ASTM D4101–04
Standard Specification for Polypropylene Injection and Extrusion Materials

 

 ASTM D4146–10
Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel

 

ASTM D4218–96 (Reapproved 2001) Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique

 

ASTM D4228–99 (Reapproved 2005)
Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces

 

ASTM D4244–95 (Reapproved 2001)
Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Acrylonitrile-Butadiene/Poly(Vinyl Chloride) (NBR/PVC) Jackets for Wire and Cable

 

ASTM D4259−88 (Reapproved 2012) Standard Practice for Abrading Concrete

 

 ASTM D4272–03
Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop

 

ASTM D4318−10
Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils

 

ASTM D4412−15
Standard Test Methods for Sulfate-Reducing Bacteria in Water and Water-Formed Deposits

 

 ASTM D4539−10
Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)

 

 ASTM D4541−09
Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers

 

 ASTM D4549−15
Standard Classification System and Basis for Specification for
Polystyrene and Rubber-Modified Polystyrene Molding and
Extrusion Materials (PS)

 

 ASTM D4652−05 (Reapproved 2012) Standard Specification for Silicone Fluid Used for Electrical Insulation

 

ASTM D4737−10  Standard Test Method for Calculated Cetane Index by Four Variable Equation

 

 ASTM D4939 − 89 (Reapproved 2013) Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater

 

 ASTM D5199−12
Standard Test Method for Measuring the Nominal Thickness of Geosynthetics


 ASTM D5261−10
Standard Test Method for Measuring Mass per Unit Area of Geotextiles

 

ASTM D5312/D5312M−12 (Reapproved 2013) Standard Test Method for
Evaluation of Durability of Rock for Erosion Control Under
Freezing and Thawing Conditions


ASTM D5963−04 (Reapproved 2015) Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)

 

 ASTM D6339−11
Standard Classification System for and Basis for Specifications
for Syndiotactic Polystyrene Molding and Extrusion (SPS)

 

 D6442−06 (Reapproved 2012) Standard Test Method for Determination of Copper Release Rate From Antifouling Coatings in Substitute Ocean Water

 

 ASTM D6595 − 00 (Reapproved 2011) Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry

 

 ASTM D6706−01 (Reapproved 2013) Standard Test Method for
Measuring Geosynthetic Pullout Resistance in Soil


 ASTM D6862−11
Standard Test Method for 90 Degree Peel Resistance of Adhesives

ASTM D6903 − 07 (Reapproved 2013) Standard Test Method for Determination of Organic Biocide Release Rate From Antifouling Coatings in Substitute Ocean Water

 

ASTM D6992−03 (Reapproved 2015)  Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature
Superposition Using the Stepped Isothermal Method

 

 ASTM D7127−13
Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument

 

 ASTM D7337/D7337M−12
Standard Test Method for Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars

 

ASTM D7423−09 (Reapproved 2014)

Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame
Ionization Detection

 ASTM D7615/D7615M−11
Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates

 

ASTM D7803−12
Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating

 

 ASTM D7905/D7905M−14 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites